7x7 Screen House Camping Tent – Installation Manual

📦 What’s Included

• Pre-assembled pop-up frame (7x7 ft)

• Screen tent top cover with mesh sidewalls

• Stakes and ropes

• Carry bag

🛠️ Installation Steps

Step 1: Unpack and Prepare

• Remove the tent from the carrying bag.

• Place it flat on the ground and stand it upright.

• Make sure you are on a flat, open area.

Step 2: Expand the Frame

• Two people stand on opposite corners of the folded tent.

• Gently pull outward to expand the frame to about half its size.

Step 3: Place the Tent Fabric

• Drape the tent fabric (already attached to the top) over the semi-expanded frame.

• Ensure that the corners align properly with the frame.

Step 4: Fully Open the Tent

• Continue pulling out from opposite corners until the frame locks in place.

• From the inside, push the center hub upward until it clicks and fully supports the top.

Step 5: Adjust the Height

• Press the push-buttons on each leg.

• Raise the legs evenly to your desired height (usually two or three levels).

• Make sure all legs are securely locked in position.

Step 6: Secure the Tent

• Use the provided stakes to anchor each leg to the ground.

• Attach and tighten the ropes from each corner for added wind resistance.

Step 7: Use the Door & Mesh Features

• Zip open the front door for easy entry.

• Leave the mesh windows open for ventilation or zipped shut to keep out bugs.

✅ Tips for Use

• Always assemble with 2 people for safety and ease.

• Avoid setting up on uneven surfaces or in strong winds.

• Make sure the tent fabric is dry before packing to avoid mold or mildew.

• Regularly check Velcro straps and zippers for secure fitting.