Weight Water Bag – Installation Manual

📦 What’s Included

• 4 × Water weight bags

• Hook-and-loop straps (Velcro)

• Built-in top handles

🛠️ Installation Steps 

Step 1: Unfold the Water Bag

• Remove the bag from its packaging and lay it flat.

• Ensure the water valve is intact and the Velcro strap is accessible.

Step 2: Fill with Water

• Open the water cap at the top (screw cap or plug style).

• Fill the bag with clean water using a hose, bottle, or bucket.

• Fill close to full capacity to maximize weight and stability.

• Seal the cap tightly to prevent any leakage.

Step 3: Attach to Canopy Leg

• Place the filled bag around the base of your canopy or tent leg.

• Wrap the built-in Velcro strap around the leg to secure the bag in place.

• Make sure the bag is positioned snugly and upright for best performance.

Step 4: Confirm Stability

• Gently shake the canopy leg to ensure the bag is holding firm.

• In windy conditions, use additional bags or combine with sandbags for enhanced anchoring.

✅ Tips for Use

• Each bag holds approx. 8–10 kg (18–22 lbs) of water when full.

• Ideal for use on solid surfaces like concrete, bricks, or asphalt.

• In cold weather, avoid freezing—use warm water or dry fill (like sand) as an alternative.

• Empty and air-dry the bags after use for easy storage and reuse.