10x10 Premium+ Series Canopy – Installation Manual

📦 What’s Included

• 10x10 pre-assembled heavy-duty folding frame

• Premium canopy top cover

• Ropes & stakes

• Wheeled carrying bag

• Optional: sidewalls, sandbags (varies by model)

🛠️ Installation Steps 

Step 1: Unpack and Prepare the Frame

• Remove the folded canopy frame from the wheeled bag.

• Place it upright on a flat, open surface.

• Two people should stand on opposite corners.

Step 2: Partially Expand the Frame

• Gently pull the legs outward from opposite sides to expand the frame to about 50%.

• Do not open fully at this stage.

Step 3: Place the Canopy Top Cover

• Unfold the canopy top and drape it over the semi-opened frame.

• Align the corners properly with the upper frame corners.

• Use Velcro straps to attach the top to the truss bars and corners securely.

Step 4: Fully Extend the Frame

• Continue pulling the frame outward until all legs lock into position.

• From underneath, push up the center slider hub on each side until it clicks and locks.

Step 5: Adjust the Height

• Press the height adjustment buttons on each leg.

• Raise the frame to your preferred height (typically 3 levels available).

• Ensure all four legs are locked at the same level.

Step 6: Secure the Canopy

• Use the included stakes to anchor each leg to the ground.

• Attach the ropes to the top corners and tie them securely if needed.

• For additional wind protection, use optional sandbags (not shown in video).

✅ Tips for Use

• Always install with at least 2 people.

• Avoid setting up during high winds or heavy rain.

• After use, dry the canopy top before storage to prevent mold.

• Clean gently with mild soap and a soft cloth if needed.

• Perfect for trade shows, markets, sports events, and backyard use.