10x10 Master Series Aluminum Canopy – Installation Manual

📦 What’s Included

• 10x10 aluminum pop-up frame

• Canopy top

• Sandbags

• Ropes and stakes

• Carrying bag

🛠️ Installation Steps

Step 1: Prepare and Unpack

• Place the canopy bag on a flat, open surface.

• Unzip the bag and take out the folded frame.

• Two people stand on opposite corners and gently pull the frame outward, stopping halfway.

Step 2: Attach the Canopy Top

• Drape the canopy top over the partially opened frame.

• Align each corner of the fabric with the corresponding frame corners.

• Use Velcro straps to secure the top to the truss bars and corners.

Step 3: Fully Expand the Frame

• With two people, hold opposite sides and pull the frame outward until it clicks and locks into place.

• Push up the central sliding bracket from underneath to secure the upper structure.

Step 4: Adjust the Height

• Press the push-button locks on each leg and extend them to the desired height.

• Make sure all four legs are evenly adjusted and locked securely.

Step 5: Secure the Canopy

• Fill the provided sandbags with sand or other heavy material.

• Wrap and secure the sandbags around each leg.

• Use ropes and stakes to anchor the canopy to the ground for added wind resistance.

✅ Tips for Use

• Always assemble with 2 people for safety and ease.

• Avoid setup in high winds or storms.

• Store the canopy in a dry condition to prevent mildew or damage.

• Periodically check all joints and fasteners to ensure stability.