FREE SHIPPING On All Orders $69+🚚

🏕️ MasterCanopy Pop Up Canopy Tent with 2 Shelters Installation Manual

🏕️ MasterCanopy Pop Up Canopy Tent with 2 Shelters Installation Manual

📦 Package Contents

  • 1 × Pop-up Canopy Frame

  • 1 × Canopy Top Cover

  • 2 × Side Shelters (with zipper or Velcro)

  • 4 × Support Poles for Shelters

  • 4 × Guy Ropes

  • 4 × Ground Stakes

  • 1 × Carrying Bag


🛠️ Installation Steps

Step 1: Choose a Location & Unfold the Frame

  • Select a flat, open space with no overhead obstructions.

  • With two people, remove the frame from the carry bag.

  • Each person grabs two opposite legs and gently pulls the frame outward until it's halfway open.

⚠️ Do not fully extend the frame yet to make top cover installation easier.


Step 2: Attach the Canopy Top Cover

  • Unfold the canopy top and lay it over the partially opened frame.

  • Align the corners and fasten them to the frame using Velcro straps or loops provided.


Step 3: Fully Expand the Frame

  • With two people, continue pulling the frame outward until all corners lock into place with a “click” sound.

  • Make sure the frame is fully stretched and secured.


Step 4: Adjust the Leg Height

  • Press the push-button on each leg and raise the canopy to the desired height setting.

  • Release the button to lock the leg in place.

  • For best performance, extend all legs to maximum height.


Step 5: Attach the Side Shelters

  • Locate the two side shelters and unzip/unfold them.

  • Connect each shelter to one side of the canopy using zippers or Velcro fasteners.

  • Insert the two support poles under each shelter to create the angled shade extension.

  • Use ground stakes to secure the shelter pole bases for stability.


Step 6: Secure the Canopy with Ropes and Stakes

  • Attach guy ropes to the top corners of the canopy.

  • Stretch each rope outward at a 45° angle and stake it into the ground using ground stakes.

  • Double-check that all points are tightly secured, especially in windy conditions.


Step 7: Disassembly & Storage

  • Detach side shelters and support poles.

  • Remove guy ropes and ground stakes.

  • Lower all legs by pressing the push-buttons.

  • Collapse the frame by pushing inward from opposite corners.

  • Remove the top cover, fold it, and place all components into the carrying bag.


⚠️ Safety Tips & Usage Notes

  • Do not use the canopy in heavy rain or strong wind.

  • Always set up and take down with at least two people.

  • Be careful with metal joints and avoid pinching fingers.

  • Allow fabric to dry before storing to prevent mildew.

  • Periodically check all straps, zippers, and fasteners for wear.

Post a comment